What Is A Dimmable Driver And How To Install It?

LED drivers must be adjusted in order to regulate the quantity of power flowing into an LED because LEDs operate on low voltage and direct current. An electrical component called an LED driver controls the voltage and current from the power supply so that it is safe and useful for an LED to use. An LED driver changes the mains alternating current (AC) supply to direct current (DC), which is how power is often supplied.

The LED may be made dimmable by altering the LED driver, which is in charge of regulating the current that goes into the light source. This altered LED driver, commonly referred to as an LED dimmer driver, modifies the LED's brightness. It's crucial to consider a decent LED dimmer's usability while shopping for one. A dual in-line package (DIP) switch-equipped LED dimmer driver in front enables users to quickly modify output current, which in turn affects the LED's brightness.

The ability of the LED dimmer driver to work with Triode for Alternating Current (TRIAC) wall plates and power supplies is another characteristic to check for. This guarantees that you can quickly manage the quantity of electricity flowing into the LED and that your dimmer will work for any project you have in mind. You can effortlessly change the intensity of your LED lights thanks to dimmable LED drivers. Along with an LED-compatible dimmer switch or home automation system, you may dim LED tape with our mains dimmable drivers, often known as TRIAC.

In comparison to low-cost PWM dimmers installed on the low voltage (12V or 24V DC) side of the circuit, dimmable drivers provide improved dimming and control. They are a long-lasting and tasteful solution that keeps cables tucked away inside your walls and places dimming control where you would expect it: directly at the switch.

Regular power supplies and transformers are not built for dimmer switches and behave erratically when dimmed. At best, your lights may dim somewhat, but they may dim unevenly or flicker, and at worst, they could not dim at all. The answer is a dimmable driver, a power source created for use with a dimmer switch.

A typical dimmable driver installation is installed like this.

Please review the materials provided with your dimmer switch and dimmable driver to make sure it matches.A dimmable driver installs almost identically to a non dimmable power supply.

On the DC (output) side, you’ll connect the positive and negative wires to the LED Light Strip (or other low voltage lighting product). On the AC (input) side, you’ll connect the neutral and ground wires directly to the power source.

The live wire from your household power source will connect to the input of the dimmer switch - and the output of the dimmer switch will then connect to the live wire of the dimmable driver. NOTE : Review the materials included with your dimmer switch and dimmable driver, as many installations will also require connecting the dimmer switch to ground. Connections can be made with wire nuts, butt splices, or any other connectors that meet code in your location. Make sure to run your wires through walls, where possible, to conceal them both from view and from accidental contact.